Kenwood DNX892 Quick Start Manual page 45

Return to the Top page
Basic Operations
EXT SW (DNX892, DNX7150BT only)
Control the external devices.
1 Touch [SET].
2 Set device name, output pattern, and pulse set for each device. Then, touch [6].
For detailed operation, see
Camera
Set the parameters for the camera.
1 Touch [SET].
2 Set each item and touch [
For detailed operation, see
OEM SETUP (North America Sales area only)
This function requires a commercial adaptor.
Consult your Kenwood dealer for details.
DEMO
Set the demonstration mode. Default is "ON".
1 Touch [ON] or [OFF].
2
Touch [Finish].
NOTE
• These settings can be set from the SETUP menu. See
12 12
EXT SW setup (P.96).
].
Camera Setup (P.102).
Setting Up (P.92).