Kenwood DNX892 Quick Start Manual page 41

Return to the Top page
Basic Operations
DNX692/DNX572BH/DNX4150BT
3
4
5
6
R-CAM
7
8
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
DNX692:
DNX572BH, DNX4150BT:
If above icons are showed, read the article applicable to the unit you use.
How to insert a microSD Card
NOTE
• A dummy micro SD card is inserted as the slot cover. Remove it before using and keep it in an appropriate place.
1) Hold the microSD card with the label
side facing right and the notched section
down, and insert it into the
clicks.
ö To eject the card:
Push the card until it clicks and then remove your
finger from the card.
The card pops up so that you can pull it out with
your fingers.
8 8
2
slot until it
8
1