Camera Setup - Kenwood DNX4150BT Instruction Manual

Return to the Top page
Setting Up

Camera Setup

You can set camera parameters.
1
Press the volume knob.
Popup menu appears.
2
Touch [SETUP].
SETUP Menu screen appears.
3
Touch [Camera].
Camera SETUP screen appears.
4
Set each item as follows.
R-CAM Interruption
Sets a method for switching the display.
Setting values are ON and OFF.
ON: Switches to the rear view camera video
display when shifting to reverse or
pressing the <TEL>*
OFF (Default): Switches to the rear view
camera video display when
pressing the <TEL>*
1 second.
Parking Guidelines*
2
You can display parking guidelines to enable
easier parking when you shift the gear to the
reverse (R) position.
Default is "ON".
82 82
button for 1 second.
1
1 button for
Guideline Setup*
2
Adjust the parking guidelines. See
the parking guidelines
*1 [TEL Key Longer than 1 Second] must be
set to "R-CAM". See
*2 This setting becomes settable only when
the "Rear Camera" is set to [Other].
Adjusting
(P.83).
User interface (P.74)