Lenovo ThinkStation C30 Hardware Maintenance Manual page 116

8. Touch the static-protective package that contains the new microprocessor to any unpainted surface on
the outside of the computer. Then, remove the new microprocessor from the package.
9. Remove the new microprocessor from the protective cover that protects the gold contacts on the
bottom of the new microprocessor. Do not touch the pins on the microprocessor socket or the gold
contacts on the bottom of the new microprocessor.
Figure 41. Do not touch the pins
10. Note the orientation of the new microprocessor. Hold the new microprocessor by its edges and align
the notches on it with the tabs
1
microprocessor straight down into the microprocessor socket.
Note: The small triangle
indicator. The new microprocessor is in the correct orientation when this indicator faces the beveled
corner of the microprocessor socket.
4
Figure 42. Installing the microprocessor
110
ThinkStation Hardware Maintenance Manual
in the microprocessor socket. Then, carefully lower the new
2
on one corner of the new microprocessor is the microprocessor orientation
3