Toshiba RAS-12KSX-1 Service Manual page 50

No. Part name
‚
Electric parts
box assembly
Procedures
1) Follow the procedure up to 3) in
2) Remove screw of earth lead attached to the
end plate of the evaporator.
3) Remove the lead wire cover, and remove
connector for the fan motor and connec-
tor for the louver motor from the electric
parts box assembly.
4) Pull out TC sensor from sensor holder of the
evaporator.
5) Disengage the display unit by simply pushing
at the top of the display unit.
6) Remove the fixing screw that secures the
electric parts box assembly, and remove the
assembly.
<How to assemble the electric parts box>
1) Hook the top part of the electric parts box
assembly onto the claws on the back body,
and secure it using the fixing screw.
Now attach the display unit. Connect the
connectors for the fan motor and louver motor.
2) Secure the grounding wire using the fixing
screw. Insert the TC sensor into the sensor
holder.
* Be absolutely sure to loop the grounding
wire and TC sensor leads once at the
bottom.

above.
– –
49
FILE NO. SVM-08029
Remarks
Electric part
box cover
TC sensor
Fan motor
connector
Earth Screw
Fixing screw
AC fan motor
connector
Louver motor
connector