Arranging The Coals - Baxi windermere TF Installation And Servicing Instrucnions

5.0 Arranging the Coals – Page 11
Supplied By www.heating spares.co Tel. 0161 620 6677

5.1 Arranging the Coals

It is important that all the coals are used and arranged
as shown in order to achieve the desired flame picture.
CAUTION: The coals are extremely fragile and must be
handled accordingly. To avoid soiling ones hands,
gloves should be worn and any inhalation of the dust
should be avoided. Keep the coals away from children at
all times. Never use coals other than those supplied or
Genuine Baxi Spare Parts. Never put additional coals on
the stove. Please read section 1.3 Important Information.
5.2 Grasmere
1. Remove the coal guard (Fig. 8).
2. Carefully unpack the ceramic base (Fig. 9). Locate this
in the stove, resting on the two supports (Fig. 10 & 13).
3. Replace the coal guard (Fig. 10).
4. Three types of coal are supplied with the Grasmere, 13
small coals with location holes, 14 standard small coals
and 2 large coals.
5. Take the 13 small coals and locate them on the pegs
on the ceramic base (Fig. 11).
6. The two large coals should be placed between the
outer two coals on the back row and the ceramic
sidecheeks (Fig. 12).
7. Place the remaining 14 standard coals over the gaps
between the other small coals (Fig. 13).
8. Close the appliance door and secure it with the brass
knob (Fig. 14).