Table of Contents
Advertisement
I N S TA L L AT I O N G U I D E L I N E S
FLAMMABLE MATERIAL WARNING
Keep fixture minimum 5.0 feet (1.m) away from flammable materials and/or pyro-
technics.
ELECTRICAL CONNECTIONS
A qualified electrician should be used for all electrical connections and/or installa-
tions.
MINIMUM DISTANCE TO LIGHTED OBJECTS IS 1.6 FEET (0.5 METER).
MINIMUM DISTANCE TO FLAMMABLE MATERIALS IS 1.6 FEET (0.5 METER).
DO NOT INSTALL THE FIXTURE IF YOU ARE NOT QUALIFIED TO DO SO!
• Fixture MUST be installed following all local, national, and country commercial electrical
and construction codes and regulations.
• Before rigging/mounting the fixture to any metal truss/structure or placing the fixture
on any surface, a professional equipment installer MUST be consulted to determine if the
metal truss/structure or surface is properly certified to safely hold the combined weight
of the fixture, clamps, cables, and accessories.
• Fixture ambient operating temperature range is 14° to 113°F. (-10° to 45°C). Do not use
the fixture when ambient temperature falls outside of this range.
• Fixture should be installed outside of walking paths, seating areas, or areas within reach
of the general public.
• NEVER stand directly below the fixture when rigging, removing or servicing.
• Overhead fixture installation must always be secured with a secondary safety attachment,
such as an appropriately rated safety cable that can support at least 10 times the weight
of the fixture. Allow approximately 15 minutes for the fixture to cool down before servic-
ing or maintenance.
11
Advertisement
Table of Contents
