Toshiba e-studio 2550c Copying Manual page 21

1.BEFORE USING EQUIPMENT
e-STUDIO5055C Series, Paper Feed Unit, Paper Feed Pedestal, or Additional Drawer Module
1
Turn the power of this equipment ON.
2
Pull out a drawer carefully until it comes to a stop.
3
While holding the green lever of the side guide in the
direction of the arrow, set the side guide to the paper
size (E.g. A4-R).
Adjust the side guides with both hands.
4
Place paper in the drawer.
One drawer can hold up to 600 sheets (64 g/m2) (17 lb.
Bond).
Be sure that the height of the stacked paper does not
exceed the line indicated inside of the side guides.
P.11 "Acceptable copy paper"
Fan and jog the stack of paper well before you place it in
a drawer, or the sheets may not be separated before
being fed. Be careful not to cut your fingers when
fanning.
Place paper with its copy side up. The copy side may be
noted on its wrapping paper.
1 BEFORE USING EQUIPMENT
Placing Paper 19