Toshiba e-studio 2550c Copying Manual page 171

5.IMAGE ADJUSTMENT
3
Select a color for the parts other than black in the original.
1) Press [SECOND COLOR].
2) Select the desired color.
4
Select a color for the black part in the original.
1) Press [CHANGE BLACK TO].
2) Select the desired color.
After selecting the color, press [OK]. This is the end of the setting.
If you want to adjust the color balance, press [ADJUST] and go to the next step.
When the two colors specified are the combination of black and a color other than black, color
balance adjustment is enabled. When neither of the two colors is black, or when both of them are
black, this adjustment is disabled.
The color balance of a color other than black can be adjusted.
5 IMAGE ADJUSTMENT
Using Image Adjustment Functions 169