Upgrade Software - HP MSR930 Configuration Manual

Configuration guide | HP MSR930 Verizon 4G-LTE/3G Router Series

Upgrade software

Before starting the configuration, upgrade the HP MSR Router Series to the software required for this demo configuration.
There are two options you can use to copy the device software to the device:
Copy the device software to a USB stick, then copy it from the USB storage device to the router or switch:
•
– Insert the USB storage device into the laptop using any free USB port
– Copy the software .bin file from the laptop to a USB storage device
– Use the Windows function to "safely remove hardware and eject media"
– Remove the USB storage device from the laptop
– Insert the USB storage device into HP MSR Router Series USB port 0
– Copy the software .bin file from the USB storage device to the HP MSR Router Series
– copy usba0:/<filename.bin>.
– Remove the USB storage device from the HP MSR Router Series
Setup a temporary management IP address and download it using FTP:
•
– Connect the laptop to the demo HQ data VLAN using DHCP or give your laptop a static IP address when it is used
Use your laptop ftp client and connect to the HP MSR Router Series GE 0/0 IP address:
•
– Login as user admin, password admin
– Put software .bin file from laptop to the HP MSR Router Series
After the software .bin file has been transferred to the HP MSR Router Series, use the system console to assign the new
•
software .bin file as the main file, which will cause the router to boot using this new software:
dir
boot-loader file <filename> main
save
reboot
standalone (for example, the laptop IP address can be 10.10.10.60/24)
13