Figure 1 Set up the upgrade environment
Upgrading from the CLI
You can use the TFTP or FTP commands on the router to access the TFTP or FTP server to
back up or download files.
Using TFTP to upgrade software
This section describes how to upgrade system software by using TFTP.
Backing up the running system software image and configuration file
Perform the save command in any view to save the current configuration.
1.
<HP> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[cfa0:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):
cfa0:/startup.cfg exists, overwrite? [Y/N]:y
Validating file. Please wait....
Configuration is saved to device successfully.
<HP>
Perform the dir command in user view to identify the system software image and configuration
2.
file names and verify that the CF card has sufficient space for the new system software image.
<HP> dir
Directory of cfa0:/
0
1
2
3
4
5
252328 KB total (227856 KB free)
Console cable
drw-
-
Jun 28 2012 14:41:16
drw-
-
Jun 28 2012 14:42:56
-rw-
16256
Jun 28 2012 14:43:40
-rw-
1694
Jun 28 2012 14:47:12
-rw-
3432
Jun 28 2012 14:47:10
-rw-
23861744
Jun 28 2012 14:37:46
192.168.1.2/24
192.168.1.1/24
logfile
domain1
p2p_default.mtd
startup.cfg
system.xml
main.bin
17
TFTP/FTP
Server