Pre-Programmed Memory Locations; Capture Memory - Johannus Vivaldi 150 User Manual

Sequence - and +
Sequence is a function for sequential selecting capture memory locations.
1. Select a capture memory location to start (for example level 2, location 2).
2. Use the SEQ- or SEQ+ pistons to select the previous or next capture memory
location.
All swells to swell (S/S)
All Swells to Swell transforms the swell pedal for the Swell to a swell pedal for the
whole organ.
If no expression pedal is configured as a swell pedal for the Swell, the S/S piston
cannot be activated.
4.9

Pre-programmed memory locations

Pre-programmed memory locations are available by operating pistons PP to T.
These six memory locations have factory settings (presets) appropriate for the
quiet pianissimo to the loud tutti.
Calling up a pre-programmed memory location:
Press a pre-programmed memory location (PP-T). The active stops light up.
Programming a pre-programmed memory location:
The current setting of the pre-programmed memory location will be lost.
Although it is possible to store any registration under a piston of a pre-
programmed memory location it is advisable to select a registration matching the
text of the piston.
1. Select the desired stops.
2. Press the SET piston. Hold in the piston.
3. Press the desired pre-programmed memory location (PP-T).
4. Release the SET piston.

4.10 Capture memory

Through use of the capture memory, a registration can be activated with just one
piston. The capture memory consists of 75 levels.
These levels can be seen on the display (Mem:...
). Each level has eight memory locations
(pistons 1-8). The 600 capture memory
locations are not pre-programmed and can be programmed by the musician.
User Manual Vivaldi 150/250/350
Am:Center Mem: 1
Tr: 0/440 Cr:--
19