NordicTrack C 1500 User Manual page 10

7. Insert the wires into the Left Upright (89) as you
set the console assembly on the Left and Right
Uprights (89, 90). Be careful not to pinch the
Upright Wire (84).
Attach the console assembly with four 5/16" x
1 1/2" Screws (5) and four 5/16" Star Washers
(10). Start all four Screws, and then tighten
each of them.
8. Identify the Left Handrail (87), which is marked
"Left." Slide the Left Handrail between the con-
sole assembly and the pulse assembly.
Attach the Left Handrail (87) with two 5/16" x 2"
Screws (4), a 5/16" x 3 3/4" Screw (2), and three
5/16" Star Washers (10) as shown. Start all
three Screws, and then tighten each of them.
Attach the Right Handrail (not shown) to the
console assembly as described above.
7
5
10
84
89
8
Console
Assembly
10
4
10
Console
Assembly
90
Pulse
Assembly
87
10
4
2
5
10