Hibernation - Compal Notebook PC User Manual

Table of Contents

Advertisement

LAN (On board)
RTC
Critical low battery
Field 'Process required' identifies that further process for the occurred events must
be processed during wake up or resumes procedure.
4.6.4.4.1 LAN
LAN (On board)
S3(Standby): LAN is supported wake-up from S3 w/ AC/DC mode
S4(Hibernation)/S5: LAN just only support wake-up from S4/S5 w/ AC only
BIOS will enable or disable WOL based on device manager setting.
4.6.4.4.2 Real Time Clock Alarm
The Real Time Clock alarm interrupt will wake the system from Standby (DC/AC),
Hibernation (AC mode only) and S5 (AC mode only).
4.6.4.4.3 Critical Low Battery
Critical low battery event can wake the system from Standby (DC mode) in ACPI
mode.

4.6.5 Hibernation

To support the hibernate state, the save to disk partition or file will be created by the
operating system if the user select to enable the hibernation.
It is the responsibility of the operating system to save the system state to a disk file
and restore the system state when it is turned back on.
Yes
Yes(AC mode only)
Yes
Yes(AC mode only)
Yes
No
Yes(AC mode only)
Yes(AC mode only)
No
Yes
Yes
Yes
42

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Notebook PC and is the answer not in the manual?

Table of Contents