Table of Contents
Advertisement
Before removing an SD/MMC/MS card, stop it running from the configuration utility
on the taskbar. Failure to do so could result in the data loss.
3.1.1 Installing a SD/MS/MMC/XD/MS-pro Card
SD/MS/MMC/XD/MS-pro card, with hot-plug feature, allow you to install and remove cards
when your notebook is running. The card will be detected automatically afterbeing installed.
Usually SD/MS/MMC/XD/MS-pro Cards have a mark or symbol to show which end to insert
into the slot. Insert the card according to the orientation symbol, and slide the card into the
slot. Check the documents that came with your card if the orientation is unclear.
Hold the SD/MS/MMC/XD/MS-pro card with its orientation symbol pointing into the slot and
the topside of the card facing up.
Slide the card into the slot until it clicks into the connector.
If you encounter too much resistance, do not force the card. Check the card orientation and
try again.
3.1.2 Remove aSD/MS/MMC/XD/MS-pro Card
To remove the SD/MS/MMC/XD/MS-pro card, please push it in gently andthen it ejects
automatically.
33
Advertisement
Table of Contents
Need help?
Do you have a question about the Notebook PC and is the answer not in the manual?