RTCRST
Real-time clock reset
jumpered
unjumpered
Power Button
NOTICE:
To turn off your computer, perform an orderly computer shutdown when possible.
You can use the ACPI feature to configure the function of the Microsoft Windows 2000, and Windows XP operating systems.
Power Button Functions With ACPI Enabled
Action
Results
Computer Turned
On
and ACPI Enabled
Press
Computer goes into
power
standby mode or
button
turns off (depending
on the operating
system setup)
Hold
Computer turns off
power
button
for 6
seconds*
NOTE:
Pressing or holding the power button to shut down
the computer may result in data loss. Use the power button
to shut down the computer only if the operating system is
not responding.
Power Button Functions With ACPI Disabled
Action
Results
Computer
Computer in
Turned On and
Suspend
ACPI Disabled
Mode
Press power
Computer turns
Computer
button
off immediately
turns off
immediately
Hold power
Computer turns
Computer
button for 6
off
turns off
seconds*
NOTE:
Pressing or holding the power button to shut down
the computer may result in data loss. Use the power button
to shut down the computer only if the operating system is
not responding.
Power Button Functions for Windows NT
Action
Results
Computer
Turned On
Press power button Computer shuts
down
Hold power button
Computer turns
for 6 seconds*
off
NOTE:
Pressing or holding the power button to shut down
the computer may result in data loss. Use the power button
to shut down the computer only if the operating system is
not responding.
Power Management
Your computer can be set to use less power when you are not working. You control the power usage through the operating system installed on your
computer and certain option settings in
Computer
Computer
in Standby
Turned Off
Mode
Computer
Boots and
turns on
computer
turns on
Computer
Boots and
turns off
computer
turns on
Computer
Turned Off
Boots and
computer
turns on
Boots and
computer
turns on
Computer Turned
Off
Boots and computer
turns on
Boots and computer
turns on
system
setup. These periods of reduced power are called "sleep states:"