Level Adjustments - Progear Fitness Air Elliptical Owner's Manual

Adjusting the Rear Stabilizer
End Cap or Adjustable Leveler
The Elliptical has to be set up on a
flat surface. Otherwise, shaking
or wobble might occur during the
workout. Please use the following
two methods to adjust the Elliptical
Level.
IMPORTANT: Please follow these important steps to ensure the stability of the
elliptical when in use.

LEVEL ADJUSTMENTS

B.
Adjustable Leveler
A.
Adjusting the Rear Stabilizer End Cap #61:
The Rear Stabilizer End Cap #61 is designed
with different angle surfaces to level the Elliptical.
Please rotate the Rear Stabilizer End Cap #61 till
one of the surfaces firmly settle on the floor.
B.
Adjusting the Adjustable Leveler #57:
The Adjustable Leveler #57 is designed to
distribute the Elliptical and User's weight to
the ground level evenly. You should adjust the
Adjustable Leveler #57 until it slightly contacts
with the floor, so that they are at the same level
as the front and rear stabilizer end cap. If the
Elliptical is set up on a carpet, please make sure
the Adjustable Leveler #57 reaches the floor
instead of the carpet surface.
20
A.
Rear Stabilizer End Cap