Computer - Progear Fitness Air Elliptical Owner's Manual

SPECIFICATIONS:
TIME ---------------------------------------------------- 00:00-99:59 MIN: SEC
SPEED ------------------------------------------------- 0.0-999.9 MPH
DISTANCE -------------------------------------------- 0.00-99.99 MILE
CALORIE ---------------------------------------------- 0.0-999.9 KCAL
PULSE ------------------------------------------------- 40-200 BPM
USING YOUR COMPUTER
The computer can be activated by pressing the MODE button or by pedaling. If you
leave the equipment idle for 4 minutes, the power will turn off automatically.
MODE BUTTON FUNCTIONS:
Press the MODE button once to select the desired function of the computer.
Press and hold the MODE button for 4 seconds to reset all data values.
COMPUTER FUNCTIONS:
SCAN: Press the MODE button until the arrow points to SCAN, the computer will
automatically scan through each function except the PULSE function every 6
seconds.
TIME: Press the MODE button until the arrow points to TIME, the computer will
display your elapsed workout time in minutes and seconds.
SPEED: Press the MODE button until the arrow points to SPEED, the computer will
display the current training speed.
DISTANCE: Press the MODE button until the arrow points to DISTANCE, the
computer will display the cumulative distance traveled during workout.
CALORIE: Press the MODE button until the arrow points to CALORIE, the
computer will display the ESTIMATED number of calories you are burning during
the workout. Please note that the readings are only estimates and there are many
factors that can't be accounted for such as fitness level, body fat percentage, age,
weight and gender.
PULSE: Press the MODE button until the arrow points to PULSE, the computer will
display your current heart-rate readings only if BOTH hands are gripping the
hand-pulse sensors. No readings or inaccurate readings may occur if only one hand
is gripping the hand-pulse sensor.
HOW TO INSTALL THE BATTERIES:
1. Remove the battery cover on the back of the computer.
2. Place two "SIZE-AA" batteries into the battery housing.
3. Insure batteries are correctly positioned and battery springs are in proper contact
with batteries.
4. Re-install the battery cover.
5. If the display is illegible or only partial segment appears, remove the batteries
and wait 15 seconds before reinstalling.

COMPUTER

18