Wilson Electronics AG Pro 75 Installation Manual page 15

Additional
Instructions for the
AG Pro Installer™
with separate uplink
and downlink gain
controls
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: tech@wilsonelectronics.com. Hours: 7 am to 6 pm MST.
This signal booster is supplied with
separate uplink and downlink gain
controls . Note: All gain controls
should be set to maximum. If you
have green lights, the installation
is complete.
If one or more lights are
blinking orange, the signal
booster is experiencing receiver
overload. Reduce the uplink (UL)
gain control, without reducing the
downlink (DL) gain to eliminate the
overload . This configuration will
eliminate cell tower interference
(overload) without reducing
coverage in the building .
14