Setting Twain Driver - Utax 3060i3560i User Manual

Installing and Setting up the Machine > Installing Software

Setting TWAIN Driver

Register this machine to the TWAIN Driver. Instructions are based on interface elements as they appear in Windows 7.
1
2
3
Display the screen.
1
Select [Start] button on the Windows,
Driver Setting]. TWAIN Driver screen appears.
In Windows 8, select [Search] in charms, [Apps], and then
2
Click [Add].
Configure TWAIN Driver.
4
1
2
3
5
6
7
NOTE
When the machine's IP address is unknown, contact Administrator.
For information on login user names and passwords, refer to
For information on account IDs, refer to
Finish registering.
NOTE
Click [Delete] to delete the added machine. Click [Edit] to change names.
[All Programs], [(Brand Name)] and then
Enter the machine name.
When a model name without "(BOX)" is selected, the unit option
appears. Set units of measurement.
Select this machine from the list. To scan a document stored in a
custom box in this machine, select a model name with (Box) from
"Model".
Enter the machine's IP address or host name.
When user login administration is enabled
Select the checkbox beside [Authentication],
and enter Login User Name (up to 321
characters) and Password (up to 64
characters).
When job accounting is enabled, select the
checkbox beside [Account], and enter the
account ID as many as eight digits.
When using SSL, select the checkbox beside SSL.
Job Accounting Setting on page
2-22
[TWAIN Driver Setting].
User Login on page
9-27.
[TWAIN
9-2.