Call Timer; Power Key Ends Call; Noise Reduction; Step-Up Ring Volume - Kyocera DURAFORCE ULTRA 5G User Manual

With sapphire shield
Hide thumbs Also See for DURAFORCE ULTRA 5G:
Table of Contents

Advertisement

3.
Enter phone number.
4.
Tap
to make an RTT call.
5.
When connected, type a message in the text field.
Answer an Incoming Call Using Real Time Text
► Swipe
to answer an incoming call in RTT mode.

Call Timer

To view the call timer and call duration:
1.
From the Home screen, tap
2.
Tap Call timer.
For other Call settings menus listed below, you can simply set each one to on or off by tapping
the on/off icon.

Power Key Ends Call

Set your phone to end calls by pressing the Power key.
NOTE: This function does not work to reject incoming calls.

Noise Reduction

Your phone can suppress background noise to improve audio quality for the other party during
voice calls.

Step-up ring volume

Set your phone to raise the ring volume gradually from minimum to maximum.

Vibrate When Ringing

Set your phone to ring and vibrate simultaneously.

Dial Pad Touch Tones

Play tones when using the dialpad.

Flashing light when ringing

Set your phone's LED light to flash when ringing.
Hearing Aids – Telecoil Mode
Hearing aid mode was designed for hearing aids that have a telecoil. To use the telecoil function
in your phone, you will need to set the Hearing aid mode to on.
>
> Call settings.
38
Phone Calls

Advertisement

Table of Contents
loading

Table of Contents