Hydrostatic Transmissions - Country Clipper Challanger 510 Safety Instruction & Operatorrs Manual

Hide thumbs

Table Of Contents

Table of Contents

Neutral

Plate

Neutral Plate

Nuts

B. Start the engine. With the joystick still

down, position the handle so both

wheels are stationary.

C. Tighten the two nuts on the bottom of

the neutral plate, being careful not to

shift it out of position.

D. Recheck neutral before placing the

mower back on the ground. Then shut

off the engine and remove the mower

from the blocks. Replace the fender

skirt.

JOYSTICK CONTROL LEVER

SENSITIVITY ADJUSTMENT:

To change the sideways turning

response, adjust as follows:

A. Remove the right hand fender skirt

exposing the Joystick Control Lever

assembly.

B. Remove the cross bolt, nut, & spacers.

C. For quicker reacting steering place the

long, silver colored spacers toward the

inside of the rod end ball joints and the

shorter, gold colored spacers on the

outside of the ball joints. For slower

reacting steering place the short, gold

colored spacers on the inside and the

longer, silver colored spacers on the

outside. All 4 spacers must be used

when reassembling.

Long silver

spacer

Cross Bolt

Short gold

spacer