Table of Contents
Advertisement
Return to Manuals Menu
Return to Main Menu
OWNERS MANUAL & SAFETY INSTRUCTIONS
for
TRACTOR MODELS 2204MT & 2504MT
DECK MODELS 5204M & 6004M
Mid-Mount Zero Turn Radius Mowers
Congratulations for buying a Commercial Clipper product. Your Commercial Clipper Zero Turning
Radius Riding Mower was designed and built to provide long and trouble free service. Keep in mind that
it, like any other mechanical device, can be potentially dangerous if used improperly, and hazard control
and accident prevention are dependent upon the awareness, concern, prudence, and proper training of
personnel involved in the operation, transport, maintenance, and storage of the equipment. Study this
manual and pay special attention to the important Safety Precautions. Following these instructions will
help you continue to enjoy the trouble-free performance expected of the Commercial Clipper product.
P-11456
(7/00)
Copyright, Shivvers Mfg., 2004
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Country Clipper 2204MT
Summary of Contents for Country Clipper 2204MT
- Page 1 Return to Manuals Menu Return to Main Menu OWNERS MANUAL & SAFETY INSTRUCTIONS TRACTOR MODELS 2204MT & 2504MT DECK MODELS 5204M & 6004M Mid-Mount Zero Turn Radius Mowers Congratulations for buying a Commercial Clipper product. Your Commercial Clipper Zero Turning Radius Riding Mower was designed and built to provide long and trouble free service.
-
Page 2: Table Of Contents
Return to Manuals Menu Return to Main Menu TABLE OF CONTENTS I. OWNER INFORMATION Warranty Information ---------------------------------------------------- II Specifications ------------------------------------------------------------ III II. SAFETY Accident Patterns --------------------------------------------------------- 1 Safety Instructions and Recommendation ------------------------- 1 Safety Interlock Systems ----------------------------------------------- 3 III. START UP AND OPERATION Checklist Before Operation -------------------------------------------- 3 Control Locations --------------------------------------------------------- 4 Operation ------------------------------------------------------------------- 4... -
Page 3: Warranty Information
Return to Manuals Menu Return to Main Menu WARRANTY INFORMATION SERIAL NUMBER __________________________________________________________ DATE PURCHASED ________________________________________________________ Condition of Mower (New or Used)______________________________________________ Hour Meter Reading__________________________________________________________ SERVICE SCHEDULE Service Performed and Date ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________ ___________________________________________________________________________... -
Page 4: Specifications
Return to Manuals Menu Return to Main Menu TRACTOR SPECIFICATIONS w/ 52" DECK w/ 60" DECK Length All Models -------------------------------------------------- 81" 81" Width All Models ------------------------------------------------ 49" 49" Height All Models (To top of seat back)------------------- 43" 43" Weight All Models -------------------------------------------------- Approx. -
Page 5: Safety
Return to Manuals Menu Return to Main Menu SAFETY SAFETY INSTRUCTIONS AND ACCIDENT PATTERNS TO AVOID RECOMMENDATIONS CONTACT WITH THE ROTATING PEOPLE WHO OPERATE, SERVICE, BLADE -- This accident usually OR ARE OTHERWISE ASSOCIATED happens when the operator is clearing with the Zero Turning Radius Mower the discharge chute of grass, (especially should be trained in its proper use and... - Page 6 Return to Manuals Menu Return to Main Menu reverse position rapidly. The speed DO NOT SMOKE AROUND THE and/or direction of travel is affected MOWER or the gasoline storage instantly by movement of the Steering container. Gasoline fumes can easily Control Levers.
-
Page 7: Safety Interlock Systems
Return to Manuals Menu Return to Main Menu THIS MACHINE IS NOT MEANT FOR WARNING HIGHWAY OR STREET USE. It is not a recreational vehicle and it should not be operated as such. HANDLE GASOLINE WITH CARE -- IT IS HIGHLY FLAMMABLE. -
Page 8: Control Locations
Return to Manuals Menu Return to Main Menu Clean the air intake screen on the DISENGAGE MOWER BLADE CLUTCH by engine if necessary. moving clutch switch to “OFF” position. PULL ENGINE CHOKE CONTROL to full Perform any other maintenance as it position for cold starts. - Page 9 Return to Manuals Menu Return to Main Menu F. Remove the key and wait for all movement and all sound to cease FOR SMOOTH, SAFE OPERATION, MOVE before dismounting. THE STEERING CONTROL LEVERS IN A GENTLE, SLOW MOTION. NEVER PULL OR PUSH THE STEERING CONTROL LEVERS RAPIDLY, ESPECIALLY ON GRADES.
-
Page 10: Mowing Recommendations
Return to Manuals Menu Return to Main Menu When mowing tall grass, make two MOWING RECOMMENDATIONS passes, mowing off 1/2 of the desired cut on the first pass, and then the Keep mower blades sharp. desired height the second pass. Check for hidden dangers first. - Page 11 Model Front tires Rear tires included in your Country Clipper 12 psi 12 psi Mower information packet. Models NOTE: Air intake screen must be kept Lug nuts should be checked regularly clean.
- Page 12 Return to Manuals Menu Return to Main Menu dipstick. The proper oil level should E. Install blade, cup washer, register between the marked hole on the lockwasher, and bolt. Make sure to dipstick and the end of the dipstick. tighten bolt to 60 ft.lbs. Replenish as needed with 20W-50 Motor Oil.
- Page 13 Return to Manuals Menu Return to Main Menu D. Adjusting for Straight Forward 8. STEERING CONTROL ADJUSTMENTS Tracking: A. To Adjust Neutral: In a large open area, actuate the control handles into the full forward position. If a. Remove the fender skirts from each the mower veers in either direction Left side of the machine.
-
Page 14: Leveling The Deck
Return to Manuals Menu Return to Main Menu HYDROSTATIC TRANSMISSIONS: LEVELING THE DECK: Before each use, check to be sure that A. Set the tire pressure on all four tires the cooling fins of the hydrostatic transmissions are clean. Excessive B. -
Page 15: Raising And Lowering Deck For Servicing
Return to Manuals Menu Return to Main Menu IMPORTANT NOTE: MAKE SURE PROCEDURE FOR RAISING AND THAT THE DECK IS LIFTED FAR LOWERING THE DECK FOR ENOUGH FOR THE DECK LATCH TO SERVICING FULLY ENGAGE THE LOCKING PIN (located on the left side of the deck mounting suspension). - Page 16 Return to Manuals Menu Return to Main Menu MOWER SHOWN IN SERVICING POSITION. Engine to Deck Drive Belt hooked to bolt. Deck Latch in locked position. Foot Deck in up position Hoist P-11456 Copyright, Shivvers Mfg., 2004...
-
Page 17: Trouble Shooting Checklist
Return to Manuals Menu Return to Main Menu TROUBLE SHOOTING CHECK LIST ENGINE WON’T TURN OVER: Mower blades engaged ------------------------------------------------- disengage blades Drive not in neutral ---- move Steering Control Levers to neutral “OUT” position Blown fuse ------------------------------------------------------------------------ replace fuse Dead battery --------------------------------------------------------------- charge or replace Solenoid ------------------------------------------------------------------------- consult dealer Ignition switch ------------------------------------------------------------------ consult dealer... - Page 18 Return to Manuals Menu Return to Main Menu ENGINE SOMETIMES SKIPS AT HIGHER SPEEDS: Incorrect Ignition Timing ---------------------------------------------------- consult dealer Carburetor maladjusted ----------------------------------------------- readjust carburetor Faulty spark plugs --------------------------------------------------------- check spark plug condition and reset gap* Bouncing off seat safety switch -------------------------- slow down on rough terrain ENGINE OVER HEATED: Air intake screen or fins clogged ------------------------ clean intake screen and fins Fuel mixture too lean ------------------------------------------------- readjust carburetor*...
-
Page 19: Wiring Schematic
Return to Manuals Menu Return to Main Menu WIRING SCHEMATIC: Black wires = Ground START SWITCH Red wires = Power POSITION CIRCUIT “MAKE Blue wires = Kill Circuit Yellow wires = Start Circuit Green wires = Signal Circuit START B+L+S P-11456 Copyright, Shivvers Mfg., 2004...
Need help?
Do you have a question about the 2204MT and is the answer not in the manual?
Questions and answers