Advertisement
Wiring
Wiring is straight forward.
There is no difference between the three CI-V ports, so run a shield cable to each item.
Connect the USB cable, USB A male to the computer and the USB B male Arduino Board.
An optional wall mounted power supply can be connected to the CI-V router.
IMPORTANT: The router can be powered off the USB port, however when the computer is
off, the router will "bypass" and connect all the ports together. Things will still be
functional, but the router will be inactive. This is recommended ONLY when there are just
two devices connected to the CI-V port.
IMPORTANT: The router at first opportunity after reset builds a table of discovered
equipment on each port. IF you move anything from port to port of the CI-V router it is
advised to RESET the CI-V router. This is done by hitting the reset button, or turning the
router off by removing all power sources, including the USB.
Page 3
Advertisement
