K9JM CI-V User Manual page 19

Hit the 'Test' button to see if it works. Test mode change and frequency change with the lower
buttons.
Once you see things working, hit the 'Done' button and you're good to go
DX4WIN
To use DX4Win you must use CI-V router software version 1.02 or higher. These tests were done
with version 8.05 of DX4WIN. There is no need for a resistor to pull up the reset line.
In the main menu go to "File" and select "Preferences". Click on the "Radio" tab.
Be sure to uncheck the 'DTR high' and 'RTS high' lines. The baud rate is not the default, so
uncheck the 'Default' and enter the router computer baud rate. Make sure the correct COM port is
present. Polling rate can be most anything reasonable.
I would like to thank Sam W4PK for his assistance with DX4WIN.
Page 19