Table of Contents
Advertisement
MANUAL TIME SETTING:
In case the Weather Projection Station cannot detect the WWVB-signal (for
example due to disturbances, transmitting distance, etc.), the time can be
manually set. The clock will then work as a normal Quartz clock.
Hour flashing
1.
The hour digit will start flashing.
2.
Use the CH/+ key to set the hour.
3.
Press again the SET key to set the minutes. The minute digits start
flashing.
4.
Use the CH/+ key to set the minutes.
5.
Confirm with the SET key and enter the Calendar setting.
Note:
The unit will still try to receive the signal between 12:00 to 6:00 a.m. every day
despite it being manually set and if the WWVB time reception function has
been set ON. When it does receive the signal, it will change the manually set
time into the received time. During reception attempts the WWVB tower icon
will flash. If reception has been unsuccessful, then the WWVB tower icon will
not appear but reception will still be attempted the following hour.
Minutes flashing
CALENDAR SETTING:
The date default of the Weather Projection Station is 1. 1. in the year 2003.
Once the radio-controlled time signals are received, the date is automatically
updated. However, if the signals are not received, the date can also be set
manually.
1.
The year starts flashing.
2.
Use the CH/+ key to set the year (between year 2003-2029).
3.
Press the SET key again to confirm and to enter the month setting. The
month starts flashing.
4.
Use the CH/+ key to set the month.
5.
Press the SET key again to confirm and to enter the date setting mode.
The date starts flashing.
6.
Use the CH/+ key to set the date.
7.
Confirm all calendar settings with the SET key and enter the Snooze
setting.
Date and month (24hr time format)
Month and date (12hr time format)
Year
Hide quick links:
Advertisement
Table of Contents
