Troubleshooting Guide; Replacement Parts - Ninja BL773CO Mega Kitchen System Owner's Manual

Troubleshooting Guide

PROBLEMS
Motor doesn't start or
attachment doesn't rotate.
Food is unevenly chopped.
Food is chopped too fine or is
too watery.
Food collects on lid or on the
sides of the container.
You cannot achieve snow
from solid ice.
Motor base won't stick to
counter or table top.
Leaking is occurring when
using the Nutri Ninja
Ingredients are stuck and not
fully blending.
The Nutri Ninja button does
®
not work.

Replacement Parts

ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.
13 TOLL FREE:
Make sure the container is securely placed on motor base.
Make sure the lid is securely on container in the correct position (align arrows).
The appliance is turned "Off". Press the power button ( ) to turn "On".
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overloaded. The appliance will stop and the power light will
remain on while speeds 1, 2 and 3 will flash. Unplug and wait approximately
15 minutes before using again.
The unit has overheated. Unplug and wait approximately 15 minutes before
using again.
Either you are chopping too much food at one time, or the pieces are not of
an even size. Try processing smaller amounts per batch.
The food has been over processed. Use pulse button for controlled
processing.
The mixture is to thick. Add more liquid.
Do not use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.
Make sure surface and suction feet are wiped clean. Suction feet will only
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes.
DO NOT attempt to use appliance when the motor base is stuck to a
surface that is not secure, (cutting board, platter, plates, etc.).
Ensure the blade is properly twisted into the cup and sealed tightly into
cup. place. Check to see that the lid gasket is properly in place.
®
You may have overloaded the Nutri Ninja
then resume blending. You may also add liquid to make blending easier.
The Nutri Ninja
cup assembled to the motor base. This function was designed specifically
for the Nutri Ninja Cups to operate at the ideal speed.
1-877-646-5288
POSSIBLE REASONS & SOLUTIONS
®
button will only operate when you have the Nutri Ninja
®
cup. Try pulsing 3-5 times and
®