Assembly And Use For The 64 Oz. Bowl - Ninja BL773CO Mega Kitchen System Owner's Manual

Assembly and Use for the 64 oz. Bowl

WARNING: Never leave the appliance unattended while in use.
ASSEMBLY
Fig. 1
Fig. 2
Use caution when handling the blade assemblies.
IMPORTANT: Make sure that the motor base is
plugged in for use.
1 Place the motor base on a clean, dry, level surface such
as a counter or table top.
2 Align and lower the bowl onto the motor base. (Fig. 1)
Handle should be aligned slightly to the right of the
"LOCK" symbol on the motor base.
3
Rotate the bowl clockwise as far as it will go to lock in
place. (Fig. 2)
4
The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
5
Holding the desired blade by the top of the shaft, place
it onto the drive gear inside the bowl. Ensure that the
blade assembly is seated properly and is standing
upright. (Fig. 4)
NOTE: The blade will fit loosely on the drive gear.
Fig. 3a
Fig. 3b
6
Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
7 Holding the lid from the feed chute, place it on top of
the bowl and turn clockwise aligning the arrow ( )
located on the lid with the arrow ( ) located on the
bowl's handle. You will hear a click when the lid is
locked in place. (Fig. 5)
8 Plug the power cord into the electrical outlet and press
the power button ( ).
NOTE: As a safety feature, the power button ( )
will flash and the motor will not work if the bowl
and lid are not installed correctly. When the
bowl and lid are installed properly, the power
button ( ) will be solid, indicating that the
appliance is ready for use.
NOTE: The 64 oz. bowl is not intended for
blending drinks. Do not overfill. To add liquids
during processing, remove the food pusher
from the feed chute to drizzle in liquids. Do not
remove the lid while in use.
www.ninjakitchen.com
Fig. 4
Fig. 5
8