Care & Maintenance - Ninja BL773CO Mega Kitchen System Owner's Manual

Care & Maintenance
HOW TO CLEAN
CAUTION: Make sure that the motor base is unplugged
from the power source before inserting or removing any
blade assembly and before cleaning.
CAUTION: DO NOT immerse the motor base into water
or any other liquid.
NOTE: All jars, lids, discs and blades are dishwasher
safe. All jars, lids and plastic components of blade and
disc assemblies are BPA free.
1 Separate/remove all parts from each other.
2
Clean the motor base with a damp cloth and wipe dry.
3
Place the pitcher, Nutri Ninja
dishwasher. Place the lids and blade assemblies on
the top rack. Use caution when handling the blade
assemblies as the blades are very sharp.
NOTE: You may also wash the containers by filling ¾
of the container with warm water and a drop of dish
washing detergent, placing the corresponding lid on the
container and pressing the pulse button a few times.
Once clean, remove the container from the motor base.
Rinse the container, blade assembly and lid under
running water. Allow all the parts to dry before storing.
Please call customer service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
cup and bowl in the
®
HOW TO STORE
1
Store the Ninja Mega Kitchen System
®
with the pitcher on the motor base, Stacked Blade
Assembly inside the pitcher and the lid locked
on the pitcher. Do not place anything on top. Store
the bowl with the Chopping Blade assembly inside and
the lid on top. Store the Nutri Ninja
assembly attached to the cup and all other attachments
along side the appliance or in a cabinet where they will
not be damaged and won't cause a hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja Mega Kitchen System
®
system which prevents damage to the unit's motor and drive
system should you inadvertently overload your appliance. If
the appliance is being overloaded, the motor will stop and the
power light will remain lit and speeds 1, 2 and 3 will flash. To
reset the appliance, follow the resetting procedure below:
1
Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the blade assembly.
3 Allow the appliance to cool for approximately 15
minutes.
4
Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
www.ninjakitchen.com
upright
®
cup with the blade
®
features a unique safety
®
12