Operation; Function Setting - Canon BJC-55 Service Manual

5. OPERATION

5-1. Function Setting

Default setting
The default settings can be selected by button operation when the power is turned on.
When the printer is turned on, hold down the POWER button until the beeper sounds the
specified number of times for the desired function setting (BJ M40: Table1&2), and
release the POWER button to set.
BJC-55
<Points of difference from the BJC-50>
1) No BJ mode setting
2) Addition of setting to enable/disable the ink low warning.
3) Addition of euro font setting (Code Page 858).
Print mode
Left Margin
Text Scale Mode
Paper Feed Position
Smoothing
Reduction
Automatic Power Off
Font
Font Lock
Input/Download Buffer
Automatic Line Feed
International Character Set
Character Set
Code Page
Ink Low Warning
Note:
The setting to enable Table 6 changes only "Character Set" and "Code Page." (That is,
"Character Set" and "Code Page" are changed to "Graphics" and "858," respectively.)
Function Setting
Mode Beeper
Table 1 7 times
Table 2 8 times
Table 3 9 times
Table 4 10 times
Table 5 11 times
Table 6 12 times
Table 1 Table 2
HQ HQ
LTR LTR
Disable Disable
8.5 mm 8.5 mm
Disable Disable
1/1 1/1
Enable Enable
Roman Roman
Disable Disable
25kB/0kB 25kB/0kB
CR CR
USA USA
Italics Italics
437 437
Disable Enable
Remark
Factory default setting (Japan/CCSI
/Canada/low voltage regions)
Factory default setting (Others)
BJC-55 only
Table 3 Table 4
HQ HQ
A4 A4
Disable Disable
8.5 mm 8.5 mm
Disable Disable
1/1 1/1
Enable Enable
Roman Roman
Disable Disable
25kB/0kB 25kB/0kB 25kB/0kB
CR CR
USA USA
Italics Italics
437 437
Disable Enable
7
Table 5 Table 6
HQ ---
A4 ---
Disable ---
8.5 mm ---
Disable ---
1/1 ---
Enable ---
Roman ---
Disable ---
---
CR ---
USA ---
Graphics Graphics
858 858
Disable ---