Canon BJC-55 Service Manual page 14

(3) Click "Open" to open the "Open" dialog box.
Select the file downloaded in the procedure (1).
Be sure to select the file from the "Open" dialog box. If the file name is input directly
in the "File Name" of the main dialog box, the file name will not be selected properly.
Select the file to be
sent to the printer.
(4) Make sure that the selected file name and pass name are correctly indicated in the
"File Name" of the main dialog box.
Make sure that the selected file
name and pass name are correctly
indicated.
Example:
C:¥My documents¥BJC55v 1000.DL
Pass Name
(5) Click "Send" to download the selected file to the printer.
The writing process takes approx. 40 seconds, however, it may occasionally
take longer, depending on the performance of the host computer and the transfer
speed of the OS.
Please be careful not to turn off the power by unplugging the DC plug during
file-writing operation.
(6) The Power Indicator of the printer blinks while the Flash ROM is being written to.
(7) When the short beeps sound twice on the printer side, and the Power LED lights,
the writing operation has completed.
(8) After confirming the completion of the writing operation, unplug the DC plug from the
printer. Unplugging the DC plug ends the writing mode.
(9) Confirm whether the writing has normally finished by outputting the list of the
function setting status.
<How to output the list of the function setting status>
Attach the DC plug of the Universal Adapter, and install the battery in the printer.
Then, press the POWER button at soft-power-off status, and release the button after
two beeps. (For details, refer to "3.4. Self Test" in Chapter 3 "OPERATION" of the
BJC-50/50v Service Manual.)
File Name
12
Click here after
selecting the file.