Using Multiple Remote Control Senders - La Crosse Technology WS-7054U Instruction Manual

VIII. USING MULTIPLE REMOTE
CONTROL SENDERS
Your WS-7054U Indoor Temperature Station
can receive signals from five different Remote
Control
temperature data transmission and the TX3UP
a) Remove the table stand. To
do this, pull down on the
stand from the rear and rotate
forward.
b) Fix a screw (not included)
into the desired wall, leaving
approximately 3/16 of an inch
(5mm) extended from the
wall.
c) Place the Indoor Temperature
Station onto the screw using
the hanging hole on the
backside.
Station down to lock the
screw into place.
Senders
Gently pull the
(The TX3U features
18