Optional Outdoor Remote Senders - La Crosse Technology WS-7059U4 Instruction Manual

IV. ADDING OUTDOOR REMOTE CONTROL
SENDERS (OPTIONAL)
The WS-7059U is able to receive signals from 3 different
Remote Control Senders (RCS). The RCS model(s) that
you choose will come with their own set of instructions—
follow these instructions for a complete guide to setting
up. When the RCS units are set up, INDOOR LCD also
becomes the OUTDOOR LCD, however it will only be
referenced as the former. The outside humidity will only
register if a temperature/humidity RCS is used.
Following are some brief instructions for the basic set-up
of RCS units with the WS-7059U. These extra sensors
can be purchased through the same dealer as this unit, or
by contacting La Crosse Technology directly. A TX4U
will monitor the temperature and humidity, a TX3U will
monitor temperature only, and the TX3UP will monitor
the temperature via a probe for use in pools, spas, etc.
Note: When setting up multiple units it is important to
insert batteries first into all the RCS units, and in numeric
sequence. Second install batteries into the Indoor
Temperature Station. Transmission problems will arise if
this is not done correctly and if the total time for set-up
exceeds 6 minutes.
A. SET-UP OF MULTIPLE UNITS
Note: If there are no RCS units
°
"- - - F" and "- -%" will appear in the
INDOOR LCD, or only the indoor
temperature and humidity.
18