battery cover to fall away from the
unit.
back into the hole and angle it
slightly, so the threads grab the
battery cover.
pull the battery cover off.
3. Observing the correct polarity,
install 2 AAA batteries.
batteries will fit tightly—make
sure they do not spring free, or
start-up problems may occur.
4. Check the LCD screen of the
Remote Control Sender to see if
there is a temperature reading. If
there is no reading check the
polarity of the batteries or replace
with new batteries.
5. Observing
weather-seal is in place; replace
battery
mounting bracket.
Place the screw partially
With the screw,
that
cover,
the
rubber
screw,
The
and
4