Allow Three-Way Communication (Intrusion); Changing The Flash Duration - SAGEMCOM D680C Solo User Manual

Allow three-way communication (Intrusion)

This intrusion function allows or prohibits a second handset registered
on the same base to share an ongoing conversation. If the intrusion
mode is enabled, you will then be able to share a call in progress with
another handset.
• Press Menu
• Select Settings, press OK.
• Select Advanced settings using the  or  keys and press OK.
• Select Set line using the  or  keys and press OK.
• Select Configuration using the  or  keys and press OK.
• Select Intrusion using the  or  keys and press OK.
• Change the status using the keys orand press OK.
The action is confirmed by the indication "OK".
Note The intrusion is inactive if the simultaneous function is
enabled.

Changing the flash duration

You can configure the flash duration if you use your phone abroad or on
private PABX network, you may need to modify the flash duration in
order to use your telephone correctly with regard to the following
functionalities: outgoing 2nd call, incoming 2nd call, 3 way calling.
Please contact your service provider to obtain the correct flash duration
and then modify it by doing the following.
• Press Menu
• Select Settings, press OK.
• Select Advanced settings using the  or  keys and press OK.
• Select Set line using the  or  keys and press OK.
• Select Flash time using the  or  keys and press OK.
• Select Edit using the  or  keys and press OK.
• Select the appropriate flash duration using the  or  key and
press OK.
The action is confirmed by the indication "OK".
.
.
53
D680C
Setting up...