Aqua-Sensor Troubleshooting Flowchart - Culligan SILVER SERIES Service Manual

AQUA-SENSOR TROUBLESHOOTING FLOWCHART
®
Problem:
Diagnostics Sequence:
Regenerates
Nightly
Check water usage:
higher than expected?
Gen 3: Check step 6.
The default setting is 71
minutes. If it has been
reduced, restore it to at least
the default setting.
Check eductor nozzle and
screen for plugging or fouling.
Test circuit board & probe.
Check eductor nozzle and
screen for plugging or fouling.
Check brine refill function.
Short salting could cause
reduced capacity and more
frequent regeneration.
Check seal pack for
internal leak
Check resin.
Never
Regenerates
Is there salt in
the brine tank?
Does the unit draw
brine properly?
Initiate a manual
regeneration; is water soft?
Test circuit board & probe.
Check resin.

AQUA-SENSOR TROUBLESHOOTING FLOWCHART

25