Form Feed - IBM 6400 Operator's Manual

Form Feed

This key operates only in NOT
READY state. Press Stop to place
the printer in the NOT READY state.
(See page 15.)
In NOT READY state, press and
release to move paper to the
top-of-form on the next page.
If there is any data in the buffer, it
will print first, then the paper will
move to the next top-of-form.
The data that prints is all of the data
contained in the printer buffer. The data in
the attachment buffer is not affected.
Set Top Of Form
This key operates only in NOT
READY state. Press Stop to place
the printer in the NOT READY state.
(See page 15.)
Unless there is data in the buffer,
this key sets the top-of-form (TOF)
by moving the paper down to the
print position and setting the
emulation to the top-of-form.
See the procedure on page 39 for
more information.
If there is data in the buffer (such
as after a paper jam), the printer
moves to the position where
printing stopped.
14
Form
Feed
Set Top
Of Form
Operator's Guide