Sending Via An Internet Relay - Panasonic Workio DP-8020 Operating Instructions Manual

Sending via an Internet Relay

To a Location that Has a
programmed Relay Station
Once you have recorded all
the necessary parameters in
your machine, you can send
a document to one, or
multiple G3 Fax machines
automatically through the
Internet Relay Station by
using the following
procedure. The Internet
Relay Station must have all
the required parameters
setup.
Sending via an Internet Relay
To a Location that Does Not Have a pre-programmed Relay Station
1
6
[010]STOCKHOLM
4681111234
NOTE
130
Advanced Internet Fax Features
Relayed Transmission
1
or
2
or
1. The "#" character is not available for the email address of the relay station.
2
If set on other
function mode.
If set on other
function mode.
The document(s) is stored into memory and your machine starts
7
sending the document(s) to the Relay email address of the Relay
Station with the telephone number for the End Receiving Station.
Ex: End Receiving Station : 4681111234 (Telephone Number)
Relay Station
After the Relay Station completes its transmission to the End
Receiving Station(s), your machine receives a COMM. Journal from
the Relay Station.
This Journal confirms whether the Internet Relayed Transmission
was successful.
3
Enter only the telephone
number(s) of the End
Receiving Station(s) by any
combination of the
following methods:
• One-Touch (Option)
• ABBR Dialing
• Directory Search Dialing
(For details, see page 22)
Ex:
0 1 0
ABBR
3
[see Note]
: uk-rly@london.panasonic.co.uk
SET