Panasonic Workio DP-8020 Operating Instructions Manual page 61

Select the desired Transmission setting. (See page 11)
3
Your machine can temporarily change the File Type and File Name by using
(XMT File Type and Name). You can select TIFF or PDF File Type and then change the File Name.
When sending to:
Internet Fax : select "TIFF".
PC : select "TIFF" or "PDF".
5
The document(s) is stored into
memory with a file number. Then
starts sending the document(s).
NOTE
5. For the machine to perform the email address completion the Fax Parameter No. 160
(DEFAULT DOMAIN) must be set to "Valid" and the Default Domain must be preprogrammed
in the User (Internet) Parameters. (See page 152)
6. You can send the same document(s) to multiple stations by repeating Steps 4a, 4b or 4c, and
then pressing
7. The "QUICK MEMORY TRANSMISSION" feature is disabled if multiple stations are set.
8. Direct Transmission is not available for LAN communication.
6
When an original is scanned from the Platen
Glass, the message "ANOTHER
ORIGINAL?" is shown.
.
START
FUNCTION 8 6
Place another original, then
press .
START
Machine starts sending.
4a
4b
4c
61