Advertisement
Quick Links
Advertisement
Related Manuals for d&b audiotechnik C690
Summary of Contents for d&b audiotechnik C690
- Page 1 C6/C690 Manual (3.0E)
- Page 2 WARNING! Dangerous voltage! General Information C6/C690 Manual Version 3.0E, 10/2003, D2077.E.03 © by d&b audiotechnik AG 2003; all rights reserved. The information contained in this manual has been carefully checked for accuracy, at the time of going to press, however no guarantee is given with respect to the correctness.
-
Page 3: Safety Precautions
(1.5 ft) from magnetic data carriers (floppy disks, audio and video tapes, bank cards, etc.) is sufficient; a distance of more than 1 m (3 ft) may be necessary with computer and video monitors. C6/C690 Manual (3.0E) Safety instructions C6/C690 Manual (3.0E) - Page 4 Connections The C6/C690 cabinets are fitted with a pair of EP5 connectors. All pins of both connectors are wired in parallel. The C6 uses the pin assignments 1/2. Pins 3/4 and 5 are designated to d&b active...
- Page 5 Operation with D12 Selecting C6 mode in the D12 enables up to two C6/C690 cabinets to be driven by each channel. In applications with low continuous levels and low ambient temperatures up to three cabinets per channel may be connected.
- Page 6 LCD. Selecting C6 mode enables one C6/C690 cabinet to be driven at an output power of 300 Watts. LO IMP mode allows the E-PAC to drive two C6/C690 cabinets with a 6 dB E-PAC Configuration for C6 reduction of input level to the loudspeakers.
-
Page 7: Technical Specifications
Pin assignments ......................1+ / 1– Weight ......................... 28 kg (62 lb) STANDARD 160 Hz C6 frequency response, standard, CUT and 160 Hz switch settings C6/C690 wiring diagram C6/C690 cabinet dimensions in mm [inch] C6/C690 Manual (3.0E) Page 7 of 8... -
Page 8: Eu Declaration Of Conformity (Ce Symbol)
EU conformity of loudspeakers This declaration applies to loudspeakers manufactured by d&b audiotechnik AG and includes the types listed in the table below: − C6/C690 Z2252 All production versions of these types are included, provided they correspond to the original technical version and have not been subject to any later design or electromechanical modifications.