Download Print this page

Rack Mounting; System Operation - JTS US-8010 Instruction Manual

Hide thumbs

Advertisement

5-2 Rack Mounting

(1) Before mount receivers onto DR-900 rack adaptor, please release any cables from the rear of
the receiver.
(2) Turn over receiver and DR-900 rack adaptor simultaneously, there are 4 threaded holes each
in the bottom of receiver and rack adaptor for inserting screws.
(3) Single receiver
Insert in a receiver through the front of DR-900 until it is firmly attached to the rack, then
screw on a RP-900 to another side of the rack.
(4) Dual receivers
The same way as above, put one receiver to each rack space.

5-3 System Operation

Be sure to mute the audio signal of mixer or amplifier before turning on the receiver and
transmitter.
13
WIRELESS MICROPHONE SYSTEM

Advertisement

loading

  Also See for JTS US-8010

  Related Manuals for JTS US-8010