iGenix IG9101 Instructions For Use Manual page 4

Freestanding Assembly
Foot Plate
Guide to the Control Panel
1. Control Panel
1 Power On/Off button
2 Mechanical/automatic mode selector
3 Mechanical/automatic mode timer setting.
4 Confirm button
5 Downwards adjustment
6 Upwards adjustment
7 High/low power selector
8 Power indicator light
9 Day
10 Heating element indicator light
11 Low power
12 High power
13 Negative ion function--This model without negative ion function
14 Mechanical control
15 Automatic control
16 Timer
17 Hours display
18 Minutes display
19 Real time temperature display
20 Temperature unit display
Affix foot plates and attach
castors
o
C
1. Ensure that the heater is unplugged and
that the power switches are off.
2. Turn the heater upside down.
3. Locate the four holes at each end of the
base of the heater.
4. Secure the footplates to the base through
the holes using the screws provided.
5. Turn the heater upright and plug into the
mains power outlet.
4