Related Manuals for iGenix IG9101
Summary of Contents for iGenix IG9101
-
Page 1: Instructions For Use
PANEL CONVECTOR HEATER WITH TIMER Model Number: IG9101 IG9151 IG9220 INSTRUCTIONS FOR USE Thank you for purchasing this product Please read these instructions... -
Page 2: Safety Instructions
SAFETY INSTRUCTIONS Read and follow all of the instructions even if you feel you are familiar with the product, and find a place to keep this manual handy for future reference. For your convenience record the complete model number, beginning with „IG‟, and batch number beginning with „5‟... -
Page 3: Overview Of The Appliance
Overview of the Appliance SPECIFICATIONS Rated Power: 2000W/1000W 1500W/750W 100W/500W Rated Voltage: 220 – 240 V 50Hz Dimensions: 830x76x400 595x76x400 460x76x400 Wall Mounting Instructions Before mounting please ensure the wall is suitable for this type of appliance. 1. When mounting the heater on the wall do not attach the feet to the base. - Page 4 Freestanding Assembly Foot Plate 1. Ensure that the heater is unplugged and that the power switches are off. 2. Turn the heater upside down. 3. Locate the four holes at each end of the base of the heater. 4. Secure the footplates to the base through the holes using the screws provided.
-
Page 5: Power On/Off
2. Operation Guide Power on/off Plug in the unit with a short buzz, the red power indictor “8” will always light up. The LCD display will show for 12 seconds then turn off if no buttons are pressed. Press the power on/off button “1” to turn on the device with a short buzz, the day, time, room temperature and temperature unit is displayed. - Page 6 Timer setting: The temperature display “19” will display The first number is 1, this means the heater is on the first running time, 2 for the second running time and so on. The maximum number of running times you can set is 4. The hour “17”...
- Page 7 High / Low Power Select Press the high/low power selector “7” to choose high/low power. When high power is chosen ”12” will light up, When low power is chosen “11” will light up. The memory function after shutting down by hand After being turned off by hand or automatically by the end of a designated set time, the setting program that will resume when switched back on is the one set last.
-
Page 8: Troubleshooting Guide
Troubleshooting Guide Please refer to the trouble shooting guide when experiencing an issue with your heater. If you still cannot determine the fault then please call our Customer Service number 01473 271272. Problem Possible Cause Solution 1. Not properly plugged into the 1. -
Page 9: Guarantee Information
You can extend your warranty for a further 12 months by registering your product online. Visit www.igenix.co.uk to register your extended warranty. (Product must be registered within 30 days of purchase) The warranty does not cover consumable parts that require replacement under normal use or accessories. - Page 10 View the range online at www.igenix.co.uk Follow us on Twitter @Igenix_Products...