Display indicates the settings, the processes which
are running and any messages issued by the
The appliance has been programmed with standard
settings for optimum operation. These settings can
see chapter Changing settings /
ON/OFF Button d
The appliance is switched on or set to standby mode
with button d.
When button d is pressed, the appliance heats up
and is then rinsed. The illuminated ring on button d
flashes during this process.
The appliance is not rinsed if:
- the appliance was still warm when switched on or
- coffee was not discharged before the appliance
was switched to standby" mode.
Heating and washing processes are displayed.
While coffee is being brewed, button d is assigned
a stop function. The process is terminated by
pressing button d.
i 4 hours after the last coffee was brewed, a rinsing
process is automatically initiated and the appliance
switches to standby" mode. These settings can
be changed see chapter Changing settings /
Espresso or coffee can be brewed by pressing
the 2button. The green illuminated ring flashes
while espresso or coffee is being brewed.
If the 2 button is pressed again, the coffee
brewing process is terminated.