Advertisement
Installation
FRCBRKT-BL
Furrion reversing camera mounting bracket installation:
The Furrion reversing camera prep kit includes:
6
1 x Reversing camera mounting bracket
1 x Mounting bracket gasket
1 x 6ft power cable
1 x Removable Bracket cover
When wiring the Furrion camera system as a reversing camera,
the power supply for the camera must come from a reversing
indication power source (backup lights) or transmission wiring.
The power source can also be from the 7 way connection on your
trailer using the green wire from the center pin for the back up light
power source or from directly at the back up tail light circuit which
feeds to the reversing bulbs.
For reversing camera use, mount the camera bracket on a elevated
position at the rear of the trailer or RV.
Do not mount camera in a low position..
For reversing camera function, do not connect camera to a constant power
source.
For best results, mount the camera in a high position to increase the
viewing angle.
Connect camera power cable to reversing backup lights or 7 way cable
This means the camera will only turn on when reverse gear is selected.
Furrion camera mounted correctly
Camera viewing
Hide quick links:
Advertisement
