Advertisement
Operation
Once you have fitted the camera to your trailer, RV, truck or caravan you will
need to pair the wireless camera with the LCD monitor before use.
(This is only required at initial system comissioning to pair the camera with
the LCD screen.)
Menu/Return
Up/Channel
Power/Confirm
Down
Line
To connect camera unit and screen together:
1. Ensure both rear camera and LCD display have 12V DC power supplied
(Vehicle may need to be running and in reverse gear to supply power to camera)
2. Press the power button on the LCD display to turn on
3. Press the MENU button on the display (this will bring up 4 icons on the screen)
4. Using the up and down buttons scroll across to PAIR icon
5. Press power/confirm button (short press) ("pairing" icon will be displayed)
6. Press the small button on the underside of the camera unit for 2 seconds
7. On sucessful pairing OK will be displayed on the LCD display.
Press to show OSD or return to the previous menu
Select forward in OSD operation
Confirm or enter in OSD operation, press and hold for 2S to turn off and press to
turn on
Select backward in OSD operation, press and hold for 5S to clear pairing when
there is no OSD
Guideline display selection
11
Hide quick links:
Advertisement
