Furrion FRCBRKT-BL Instructions Manual page 14

Two Camera Option: This system can support 2 seperate cameras
This feature enables two seperate cameras to be paired with the same
monitor. The cameras can be mounted in seperate locations if required.
Once both cameras are paired, use the up and down buttons on the
monitor to scroll between the camera views. Both cameras require
a contant power supply to enable switching views.
When two cameras are paired to the system, cameras are
not required to be connected to the reversing tail lights power
supply, constant power source is required to be able to scroll
between cameras using the up and down buttons on the
monitor.)
WARNING:
When cameras are wired to a constant power source, do not
use monitor when driving. Driving with a monitor on can be
a violation in state law. Check legislation before use.
When the pairing Icon is selected, a sub menu will be displayed showing
* Master Select
* Pair 1
* Pair 2
When Pairing 1 camera, select Master Icon
When Pairing 2 cameras, select Pair 1 and Pair 2 for each camera
LCD Picture Settings Sub Menu Icons:
paired to a monitor.
Brightness Contrast
Adjust Adjust
Color
Adjust
13