Installation of camera
If your RV or trailer has a Furrion reversing camera prep kit pre installed by
the OEM manufacturer. You will need to contact your local dealer or go to
furrion.com to purchase a Furrion
Camera and monitor installation
FRC12TA-BL
9
kit.
To install the camera onto a pre installed mounting bracket:
1. Remove the cable cover which is held by 4 screws on the underside of the
bracket
2. Locate the connector inside the prep kit mounting bracket
3. Connect the camera plug and socket together and install the camera with
the 4 screws
See below:
Camera viewing angle can be adjusted after camera is mounted