Advertisement
L
T
17
AJ
H
Q
25
AA
AB
24
23
24. Install the Arm Support(25), Pulley(AJ) and six(6) 1/2" thk spacers(AA) between the Top
Brackets(17). Install the plastic cap(AB) where shown.
25. Remove the two(2) 5/8" Locknuts from the shoulder bolts in the Arm Support(25), position the
Left & Right Swing Arms(23 & 24) over the shoulder bolts and replace the Locknut. Do not over
tighten the Locknut.
9
Advertisement
