Prescribe Commands - Kyocera IB 21 User Manual

PRESCRIBE commands

DUPX (select/deselect DUPleX mode)
Format DUPX mode;
Parameters mode: a number from 0 to 2
The DUPX command instructs the printer to select or deselect duplex printing and
selects the duplex mode. The parameters are as follows.
The default duplex mode can be selected by the FRPO N4 command. The
parameter values are the same as the DUPX command above. For example, to
power up the printer with the long-edge duplex binding mode, enter the
command:
ECHO !R! FRPO N4, 1; EXIT; > LPT1
For LPT1, substitute the port to which the computer is connected.
DXPG (select DupleX PaGe side)
Format DXPG side;
Parameters side: a number from 0 to 2
The DXPG command ends printing on the current page in the same manner as a
form feed. However, unlike the form feed, it also selects the paper side, front or
back, on which printing of the ensuing page is printed. The parameters are as
follows.
12
0=Select simplex mode
1=Select duplex mode, long-edge binding
2=Select duplex mode, short-edge binding